Description

Cisco Nexus7700-10Slot Dubai

The Cisco Nexus7700-10Slot Dubai represents a cutting-edge 10-slot switch equipped with a front-to-back airflow system and an integrated cable management system. Its exceptional system capacity is tailored to meet the scaling demands of even the largest cloud setups. Leveraging the latest advancements in the Cisco Nexus 7000 Series modular switches, the Cisco Nexus7700-10Slot Dubai boasts a remarkable 83 Terabits per second (Tbps) of overall switching capacity. This enables the provision of the highest-capacity 10, 40, and 100 Gigabit Ethernet ports available, supporting up to 768 native 10-Gbps ports, 384 40-Gbps ports, or 192 100-Gbps ports.

The structure of the Cisco Nexus7700-10Slot Dubai employs a passive mid-plane architecture that utilizes physical connectors and copper traces for seamless interconnection between the fabric modules and I/O modules, ensuring smooth data transfer. Notably, the inter-module switching is facilitated by crossbar fabric ASICs embedded within the individual I/O modules and fabric modules.

In terms of its architecture, the Cisco Nexus7700-10Slot Dubai adopts a scalable, fully distributed fabric setup, employing up to six fabric modules to deliver up to 1.32 Tbps per slot of bandwidth on day one. Its adaptable midplane design enables flexible technology upgrades, ensuring ongoing investment protection as your requirements evolve. The potential for future fabric modules promises even higher bandwidth capabilities on the platform.

The Cisco Nexus7700-10Slot Dubai chassis includes standard fan trays, with the option to support generation 2 fan trays. These fan trays are designed to comply with NEBS standards, making them suitable for specific system configurations alongside other chassis components. Additionally, the generation 2 fan trays ensure NEBS Level-3 acoustic compliance and allow short-term operation at 55C, especially when configured with the Nexus 7700 M3 100G I/O modules or upcoming I/O modules.

Features

• The Cisco Nexus7700-10Slot Dubai, with up to eight I/O module slots, supports up to 384 x 1 and 10 Gigabit Ethernet ports, 192 x 40 Gigabit Ethernet ports, and 96 x 100 Gigabit Ethernet ports, to meet the demands of large data center deployments.
• The Cisco Nexus7700-10Slot Dubai Switch has two dedicated half-slot supervisors to provide full redundancy, stateful supervisor switchover, and hitless In-Service Software Upgrade (ISSU) capabilities.
• The Cisco Nexus7700-10Slot Dubai has six fabric module slots to provide simultaneously active fabric channels to each of the I/O and supervisor modules. Through the parallel forwarding fabric architecture, the Cisco Nexus 7710 can achieve 21 Tbps of forwarding capacity or more.
• Front-to-back airflow helps ensure that the Cisco Nexus7700-10Slot Dubai addresses the requirement for hot-aisle and cold-aisle deployments to help provide efficient cooling.
• The system uses three redundant fan trays for cooling. Each fan tray is composed of independent variable-speed fans that automatically adjust to the ambient temperature, to help reduce power consumption in well-managed facilities while helping to enable optimum operation of the switch. The system also allows hot swapping of fan trays without negatively affecting the system.
• The system supports an optional door and air filter to promote clean airflow through the system. The addition of the air filter satisfies Network Equipment Building Standards (NEBS) requirements.
• The Cisco Nexus7700-10Slot Dubai Switch can have up to eight 3- or 3.5-(kW) power supplies. The smaller power supply configuration provides more flexibility and greater control in power provisioning. The eight power supply bays are designed for future growth, and most common configurations do not require the use of all power supply units for redundant power configurations.
• I/O modules, supervisor modules, and power supplies are accessible from the front, and fabric modules and fan trays are accessible from the back of the chassis.
• An integrated cable management system, custom designed for Cisco Nexus7700-10Slot Dubai, supports the cabling requirements of a fully configured system at either or both sides of the switch, providing outstanding flexibility. All system components can easily be removed with the cabling in place, providing ease of maintenance with no disruption.
• Cisco Nexus7700-10Slot Dubai has series of LEDs at the top of the chassis providing a clear summary of the status of the major system components, alerting operators to the need to conduct further investigation. These LEDs report the power supply, fan, fabric, supervisor, and I/O module status.
• Cisco Nexus7700-10Slot Dubai is energy-efficient designed. The Switch Dubai use 3.5-kW and 3-kW power supplies that are 96 and 90 percent efficient or greater, so less power is dissipated as heat, and more power is available for the system to use than with typical power supplies. These high-efficiency power supplies allow smaller power configuration and provide flexible power provisioning.

Specifications